BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control
  • Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock

BOSS Audio Ohm Stable Car Amplifier with Remote Subwoofer Control

59.000 BHD
    • MOSFET Monoblock Power Amplifier.
    • Remote Subwoofer Level Control Included.
    • Blue Illuminated BOSS Logo.
    • Max Power @ 2 Ohms: 1100 Watts.
    • RMS Power @ 4 Ohms: 250 Watts.
    • Imported from USA.

    View larger

    Class A/B Topology
    ------------------

    A class A/B amplifier uses two groups of transistors and it is
    generally considered to be the best compromise of the two classes
    put together. A pure class ‘A’ amplifier typically has an
    enormous amount of current flowing through its output transistors
    with no audio signal. A pure class ‘B’ amplifier has no current
    flowing through its outputs with no audio signal. This eliminates
    virtually all of the crossover distortion that’s possible with
    class ‘B’ amplifiers. A class A/B amplifier is much more
    efficient than a class ‘A’ but without the possible distortion of
    a class ‘B’.

    MOSFET Power Supply
    -------------------

    Metal–Oxide–Semiconductor Field-Effect Transistor is a
    transistor used for amplifying or switching electronic signals.
    We use it in computers, telephones, game consoles, cars,
    electrical appliances, and in our amplifiers. They are found in
    systems where information is processed or stored. A MOSFET is
    basically an electrical switch that allows the flow of electrical
    current. The MOSFET performs its most important role in our D
    Class amplifiers by allowing or preventing the flow of power and
    creating an efficient amplifier.

    General Features
    ----------------

    * Two ohm stable stereo operation with output power increase
    * Thermal, overload, and speaker short protection
    * Soft turn-on circuit
    * Remote turn on / turn off circuit
    * LED power and protection indicators
    * Black anodized heatsink
    * Nickel plated low level and high level inputs

    What Comes In The Box?
    ----------------------

    * Remote subwoofer level control
    * High input cable with connector
    * Instruction manual
    * Mounting screws

    Low And High Level Inputs
    View larger

    Low And High Level Inputs
    -------------------------

    You can get a signal into RIOT series amplifiers two different
    ways - Low level and High level input. A low level input is
    measured in voltages. It comes in the form of RCA outputs from
    the back of your receiver and goes to the RCA inputs on your
    amplifier. A high level input is measure in wattages. It comes in
    the form one positive and one negative wire from the back of your
    receiver to and goes to the input terminal of your amplifier in
    the same wire form. Low-level (RCA) input wiring is preferred for
    best audio performance. Always use a high-quality RCA cable for
    best audio performance. Note: Do not connect both the high level
    and low level inputs from your receiver to your amplifier at the
    same time.

    Variable Bass Boost
    View larger

    Variable Bass Boost
    -------------------

    With the R1100M amplifier you have Variable Bass Boost, which
    gives you control of exactly how much bass you want to pump out
    to your subwoofer(s).

    Variable Crossover
    View larger

    Variable Crossover
    ------------------

    Subwoofers reproduce sound based low range frequencies. This
    process is called the crossover effect and occurs because the
    vast majority of audio systems cannot cover the entire spectrum
    sufficiently to minimize sound distortion and maintain an
    appropriate frequency ratio. In the case of our R1100M amplifier,
    a variable crossover is offered so that you, the listener, have
    the ability to set the frequency at which the crossover occurs,
    thereby setting precise sound specifications on your subwoofer.

More from this seller:

BACK TO TOP